ACME AGRO GROUP

GLOBAL AGRO AND BIOTECH SYSTEM INTEGRATOR 

Homepage    Full Hydraulic Operated Land Grader(wheeled tractor front mounted type)
平地机
平地机
平地机
平地机
平地机
平地机
平地机
平地机
平地机
平地机

Full Hydraulic Operated Land Grader(wheeled tractor front mounted type)

1. full Hydraulic Operated Land Grader
2. low cost
2. front mounted to four wheel tractor
3. road/land grader
4. good work

AM-3200 Full Hydraulic Operated Land Grader(wheeled tractor front mounted type)

Introduction
AM-3200 is a hydraulic land grader which need to be front mounted to four wheel tractor(above 70hp),it is fully hydraulic steering gear. It is widely used for highway construction grading work, constructional engineering, water conservancy project, farmland construction, also can be used for clearing away weeds or snow

 Advantages
1. Low cost, price is only 1/10 of big land grader, but easy and convenient to operate, flexible to use, also safe and reliable, good working performance and high efficiency.
2. Short body, small turning radius, the machine drive and the ground operation performed by only one person, no longer need to cooperate by two persons, thus can drive with high proficiency.

Specification

Model 

AM-3200 

Type 

Front wheel steering, rear wheel drive

Rated traction (KN)

15.5

Length(including front balance weight suspend)

7820mm

Width

3200mm

Height (To the top of exhaust )

2820mm

Wheel base(mm)

6000

Front wheelRear wheel

1335mm1500~2100mm(adjustable)

Ground clearance(mm)

430

Diameter of turning round(m)

8.5

Min weight(kg)

4525(na cabin,no balance weight)

Front wheel weight

1990kg

Rear wheel weight

2535kg

optional front ballast

400kg(max. 10 pcs)

optional rear ballast

300kg(max. 3pc for each side)

Gear 

12F+4R

Form of turning

Independent oil duct, full hydraulic front wheel steering

power steering pump 

HLCB-D16/12(right-handed rotation)pump with constantand steady pump

Displacement (mL/r)

12

Constant flow(L/min)

16

safety valve set pressure(MPa)

12.5

hydraulic steering gear

BZZ1-160 Full hydraulic steering gear

Diameter of Steering cylinders(mm)

55

Steering cylinders trip(mm)

200

service brake

Oil bath, disc (single plate), human hydraulic foot pedals manipulation

Driving brake 

Hand operated, muti-face friction Mechanical pressure oil bath type

Tractor needed

85hp-100hp, 2WD 

Working Condition of hydraulic system:
1. Temperature range: -20-80°C
2. Ordinary hydraulic oil YA-N68GB2512-81 is the suggested working
liquid, or 11# in summer, 8# diesel engine oil(SY-1152-88) 
3. Filter rating: no less than 25micron
4. Oil temperature: working liquid temperature: 0-80°C, suggest to use 40°C~65°C.
5. Pressure of inlet opening: lowest pressure for continuous working is -0.017MPa,
Highest pressure for continuous working is +0.1MPa.


 


.